<style type="text/css">.javascriptonly { display: none; }</style>

F.J.A.M. van Houten

Medewerker OPM

Welcome

Welkom op de homepagina van F.J.A.M. van Houten.

Wellcome to the homepage of F.J.A.M. van Houten

Meer informatie:

More information:

Emeritus chair of Design Engineering at the faculty of Engineering Technology of the University of Twente.

Recipient of the Medal of Honour of the University of Twente.

Scientific Managing Director of the Fraunhofer Project Center at the University of Twente (FPC@UT)

Member of the Supervisory Board of (Apollo Vredestein B.V.)

Member of the Supervisory Board of (Royal Ten Cate N.V.)

Recipient of the 2012 Gold Medal Award of the American Society of Manufacturing Engineers (SME)

Fellow and Member of the Senate of the International Academy for Production Engineering (CIRP)

Member of the German Academy of Science and Engineering (acatech)

Member of the Royal Flemish Academy of Belgium for Sciences and the Arts (KVAB)

Member of the Wissenschaftliche Gesellschaft fuer Produktentwicklung (WiGeP)

- BerlinerKreis & WGMK

Fellow of the Design Research Society (DRS)

Fellow of the International Society for NanoManufacturing (ISNM)

International Master of the Chinese 111 program "Advanced Manufacturing Technology"

Member of the High Level Group and Implementation Support Group of the Technology Platform "Manufuture" of the European Commission

Member of the Scientific Advisory Board of the "BMBF Spitzenclusters „Intelligente Technische Systeme Ostwestfalen Lippe (it’s OWL)"

Member of the Advisory Board of the "Zeitschrift fuer wirtschaftlichen Fabrikbetrieb (ZWF)"

Member of the Scientific Advisory Board of German Federal Cluster of Excellence "Merge technologies for multifunctional lightweight structures (MERGE)

Member of the National Forum Smart Industry

Member of the TopTeam Technology Base Twente

Iniatiator of the Fraunhofer Project Center on Design and Production of Complex High Tech Systems at the University of Twente

 (FPC@UT)

 

 

 

Short Curriculum Vitae of Prof. Dr. Ir. Fred J.A.M. van Houten

 

Prof. Dr. Ir. Fred J.A.M. van Houten was born on 14 August 1951. He studied Mechanical Engineering at the Technical University of Eindhoven in the Netherlands and graduated in 1977 "Cum Laude" on software for optimization of process conditions for turning operations. In 1978 he was appointed as an assistant professor at the University of Twente and became an assoiate professor in 1990. In 1991 he obtained a PhD on a thesis about the Computer Aided Process Planning System (PART) that formed the basis for Feature Based machining of NX CAM, which is now part of the Siemens PLM solutions product suite.

In 1992 he was appointed as a visiting professor at the Ecole Normale Sup�rieure de Cachan (Paris) for a period of three months. On the basis of his work in the field of feature based CADCAM system development he was appointed in 1998 as full professor in Design Engineering at the University of Twente. In 1999 he was appointed as a visiting professor on the JR East endowed chair of Maintenance Engineering at the University of Tokyo for a period of six months.

 

Since 2000 his research domain has gradually shifted to the front end of the process creation chain. Current topics are scenario based design, Synthetic environments, Virtual and Augmented Reality, haptic devices and design support for mechatronic systems. In 2005, together with the Thales Company he has founded T-XCHANGE, an innovation accelerator that supports the so called Effects Based Solution process with computer simulations and serious gaming techniques. This VR laboratory is a good example of close industry/university cooperation.

 

Until 1 January 2017 Prof. van Houten has been the head of the Department of Design Production and Management of the Faculty of Engineering Technology. The department is also comprising the chairs of Product Design, Product-Market relations, Packaging Design and Management, Maintenance Engineering and Integrated Product Life Cycle Management. The group consists of more than 60 staff members and 30 PhD students, which are active in a wide area of research in Design Integration and Process Modeling. Prof. van Houten is member of the management team of the Faculty of Engineering Technology, is responsible for the development of the BSc/MSc program in Industrial Design Engineering. Prof, van Houten is member of the advisory board of the ministry of Economic Affairs for the Innovative Research Program Integrated Product Creation and Realization, He is member of the High Level Group and Implementation Support Group of the Enabling Technology Platform "Manufuture" of the European Commission and of the national Manufuture platform, the Smart Industry Forum and of the foundations STODT (Foundation Technical Education and Service Twente)

In April 2009 Prof van Houten  has been elected as member of the Deutsche Akademie der Technikwissenschaften (acatech)

From 1 April 2010 until 31 March 2011 Prof van Houten has been Scientific Director (a.i.) of the University of Twente research institute of Energy and Resources (IMPACT)

In August 2010 he has been elected as President (2010-2011) of the International Academy for Production Engineering (CIRP), presently he is member of the Senate of Past Presidents of CIRP.

In March 2011 Prof van Houten has been elected as member of the Berliner Kreis (Wissenschaftliches Forum fuer Produktentwicklung e.V.) The Berliner Kreis and the Wissenschaftliche Gesellschaft fur Maschinenelemente, Konstruktionstechnik und Produktionsentwicklung (WGMK) merged on 29 March 2011 in the Wissenschaftliche Gesellschaft fur Produktentwicklung (WiGeP)

In November 2011 Prof van Houten has been elected as International Master of the Chinese 111 program Advanced Manufacturing Technology of the Ministry of Education (MOE) and the State Administration of Foreign Experts Affairs (SAFEA) of the People’s Republic of China.

In December 2011 Prof van Houten has been elected as foreign member of the Class of Technical Sciences of the Royal Flemish Academy of Belgium for Sciences and the Arts (KVAB) and has beeen elected as a member of the High Level Group and Implementation Support Group of the Technology Platform "Manufuture" of the European Commission

On 4 June 2012 Prof van Houten was awarded with the 2012 Gold Medal of the Society of Manufacturing Engineers (SME)

On 12 June 2012 Prof van Houten has been elected as Fellow of the Design Research Society (DRS)

On 27 July 2012 Prof van Houten has been elected as Fellow of the International Society for NanoManufacturing (ISNM)

Prof. van Houten has acted as an assessor of research programs of several institutes like BIBA in Bremen(2002), the 3Sand G-scope aboratory of the university of Grenoble (1998,2002, 2006, 2009) , the LURPA laboratory of the Ecole Normale Superieure of Cachan, Paris (2005, 2009), the National Japanese Research Project Modelling of Synthesis (2000), the Research Foundation Flanders (FWO) (2010-present) and has been member of the jury of the �ten best international masters programs� for the Deutsche Akademische Austausch Dienst (DAAD) (2008, 2009). In January 2012 Prof van Houten has been invited to become a member of the evaluation panel of FIMECC, one of the Finnish Strategic Centres for Science, Technology and Innovation (SHOK) as well as becoming a member of the Advisory Board of the BMBF Topcluster „Intelligent Technical Systems Ostwestfalen Lippe, a consortium of 173 companies, universities and organisations. From July 2012 until July 2016 Prof van Houten was a member of the Centre Advisory Board (CAB) for the EPSRC Centre for Innovative Manufacturing in Through-life Engineering services at the University of Cranfield, UK.

In July 2013 Prof. van Houten has become a member of the Advisory Board of the "Zeitschrift fuer wirtschaftlichen Fabrikbetrieb (ZWF)" as well as member of the Scientific Advisory Board of German Federal Cluster of Excellence "Merge technologies for multifunctional lightweight structures (MERGE).

From August 2013 until February 2017 he has been a member of the Scientific Advisory Board of the Fraunhofer leitprojekt E3-Produktion

IIn november 2013 Prof. van Houten has been invited by the Wissenschaftliche Kommission Niedersachsen to become a member of the evaluation committee of the Niedersaechische Technische Hochschule, the former federation of the Technical Universities of Braunschweig and Clausthal and the Leibniz University Hannover.

In september 2014 Prof. van Houten has been invited to become a member of the evaluation comittee of the Department of Mechanical Engineering of the Technical University of Darmstadt

In September 2014, 2015, 2016 and 2017 Prof. van Houten has been a member ofthe Jury of the High Tech Platform Annual Congress selecting the most innovative company in the Netherlands

In March 2015 Prof. van Houten has been invited to become a member of the TopTeam Technology Base Twente. His colleagues in the TopTeam are Aad Veenman (chairman), Frank Biemans and Cees Timmer. The task of the TopTeam is the redevelopment of the former military airbase Twenthe into an innovative High Tech Industry park that will contribute to the economic development of the region.
The emphasis will be on creating jobs in smart, clean and human friendly, sustainable factories. This includes life cycle oriented development of high value aided products and services.

From 23 January 2017 Prof. van Houten is the Scientifc Managing Director of the Fraunhofer Project Center for Design and Production Engineering For Complex High Tech Systems at the University of Twente

On 14 May 2017 Prof. van Houten became Emeritus, but continues at the Fraunhofer Project Center.

Prof van Houten has published more than 150 scientific papers and has presented 34 invited keynote papers. He has been chairman of the Editorial Committee of the CIRP annals from 2000 until 2006. At present he is member of the editorial board of several international Journals, a.o. the CIRP International Journal of Manufacturing Science and Technology, the International Journal of Interactive Design and Manufacturing, and the international Journal on Product Life Cycle Management . He is a member of many international scientific program committees of conferences.

 
 

Detailed Curriculum Vitae of Prof. dr. ir. F.J.A.M. van Houten

 

Born:             14 August 1951 at Best, the Netherlands

 

Status:            married, no children

 

Education:     1957 -1963                            Thomas Bata School, Best

 

1963 - 1969                           Van der Putt Lyceum Eindhoven

 

                        1969 - 1977                           Technical University Eindhoven

                                                                        Department of Mechanical Engineering.

                                                                        Division of Production Engineering.

                                                                        Graduated Cum Laude

 

Mil. service:   1977 � 1978                          Officer in Royal Dutch Navy

 

 

Prof. career:  1978 � 1990                          Assistant professor

                                                                        University of Twente

Laboratory of Production Engineering

.

PhD:               may 1991                              University of Twente:

(PART, A Computer Aided Process Planning System)

 

 

1990 � 1998                          Associate professor

Computer applications in production systems

                                                                        University of Twente

Laboratory of Production and Design Engineering.

 

1998 � present                     Full Professor of Design Engineering

University of Twente

 

2001- 2016                       Chairman of the research group Design, Production and Management                   

 

 

 

Visiting professorships on invitation:

                       

Technical University of Dresden, Nov. 1992

 

Ecole Normale Sup�rieure de Cachan (Paris), Jan -Feb. 1993

 

Universidade de Sao Paulo, Escola de Engenharia de Sao Carlos, Sao Carlos, Brasil, Nov. 1995

 

University of Tokyo, April - Oct 1999

JR east endowed chair on Maintenance Engineering

 

 

Educational responsibilities:                 

                       

Mechanical Engineering

 

Supervision of the design curriculum of the department of Mechanical Engineering

 

Undergraduate (Bachelors)

 

Introduction of advanced CADCAM in undergraduate program.

Development of a curriculum for the mechanical engineering variant: Design, Production and Management

Minor on Design (for students of other departments)

 

Graduate (Masters)

 

Development of the curriculum for the European Masters Program Industrial Design and Manufacturing (with the Universities of Dortmund, Strathclyde and Aalborg)

 

Industrial Design Engineering

 

Development of the Industrial Design curriculum (parallel to Mechanical Engineering)

Responsible in the departmental management team for the educational program in Industrial Design Engineering


 

Assessments and Reviews:

 

Expert assessor of research programmes:

 

The Modelling of Synthesis project, Japan Society for the Promotion of Science, Research for the Future Program (JSPS-RFTF) (December 2000) 

Laboratoire 3S, Universit� de Grenoble Membre du Comite� Scientifique appointed by CNRS (1998, 2002 and 2006), conseil scientifique SWOT analysis (2009) 

Bremer Instituts f�r Betriebstechnik und angewandte Arbeitswissenschaft (BIBA) (2002)

Expert Assessor for the Mission Scientifique, Technique et P�dagogique du Minist�re de l�Education Nationale, de l�Enseignement Sup�rieur et de la Recherche , Departement Sciences Pour l�Ingenieur (DSPT8) (2005)

LURPA, ENS Cachan, Membre du Comit� Scientifique appointed by CNRS (2005) and appointed by Aeres (2009)

Expert assessor for the Knowledge Center Design and Technology of the Saxion University of Applied Sciences (2011)

FIMECC, one of the Finnish Strategic Centres for Science, Technology and Innovation (SHOK), member of the evaluation board appointed by the Academy of Finland (2012)

                                                                       

 

Expert assessor of grants committees                    -    

 

PROSPER, French national research grant program (CNRS), (1997)                                                                                     

Hong Kong University and Polytechnic Research Grants Committee

National Research Foundation of South Africa (2009- present)

FWO Research Foundation, Expert panel W&T7- Belgium (2010- present).

 

 

Expert assessor for academic educational programs:

 

Member of the jury of the �ten best international masters programs� for the Deutsche Akademische Austausch Dienst (DAAD) in 2006 and 2008.

Expert assessor for the Windesheim Honours College program (2009)


 

 

Assessor of academic degrees:

 

Rapporteur du jury d�Habilitation de Diriger des Recherches:

 

Institut National Polytechnique de Grenoble (A. Rivi�re) (ISMCM-CESTI) 1998

 

Universit� de la M�diterran�e Aix-Marseille II Institute de M�canique de Marseille (J.M. Linares) 2004

 

Institut National Polytechnique de Grenoble (M. Le Coq) 2007

 

Universit� de Grenoble I (L. Mathieu) 2007

 

Université de Grenoble I (A. Riel) 2012

 

 

Promoter at University of Twente of:                                           

 

Ir. Ph. Wolff, 2000

Ir. J. Lof, 2000

Ir. D. Lutters, 2001

Ir. T. Vaneker, 2001

Dipl-ing A. Layer, 2003

Ir. D. Wijnker, 2003

Ir. R. Mentink, 2004

Dipl-ing B. Sailer, 2004

Dipl-ing J Zimmermann, 2005

Ir. M. Tideman, 2008

Ir. G. Bonnema, 2008

Dipl-inf M. Groll, 2008

Ir. R. Lingbeek, 2008

Ir. W. Wits, 2008

Ir. G. Van Ouwerkerk, 2009

Ir. W. Schotborg, 2009

Ir.J. Jauregui Becker 2010

Ir. M. Popma 2010

Ir. N. van Steenis 2010

Mrs. I. Angreeni MSc. 2010

Ir. J. Miedema 2010

D. P. Borches Juzgado MSc. 2010

Ir. F. Hoolhorst 2012

Mrs. ir. M. Brouwer 2012

Ir. D. ten Dam 2012

Ir. J. Ruiter 2013

Ir. J. Thalen 2013

Drs. B. van Waterschoot 2013

Mrs. Ir. J. Garde 2013

Ir. K. Woestenenk 2014

ir. T. Weidenaar 2014

ir. T. Gorter 2014

ir. A. Veldhuis 2015

ir. S. Haveman 2015

ir. M. Essers 2016

Dipl-Ing J. Urhahne 2016

R. Wendrich 2016

 

Assistant Promoter at University of Twente of:                          

 

Ir. F. Jonkers, 1992

Ir. J.J. Tiemersma,1992

Ir. R. Boogert, 1994

Ir. O.W. Salomons, 1995

Ir. R. Geelink, 1996

Ir. H.G. Mooi, 1996  

Ir. J.H. Kappert, 1997

Ir. R. Begelinger, 1998

 

Member of PhD committees at University of Twente:                          

 

Ir. G. Bossink, 1992

Ir. A. Lenderink, 1994

Ir. L.J. de Vin, 1994

Ir. A.L. Arentsen, 1995

Ir. J. de Vries, 1996

Ir. A. Liebers, 1998

Ir. H. Wisselink, 2000

Ir. M. Giebels, 2000

Ir. M. Bosma 2000

Ir. A. Westeneng, 2001

Mrs. Ir. M. van der Voort, 2001

Ir. E. Ten Brinke, 2002

Mrs. Dipl-ing. S. Finke, 2002

Ir. E. Van der Heide, 2002

Ir. A. Van den Boogaard, 2002

Ir. F. Te Riele, 2003

Ir. P. Zandbergen, 2004

Ir. N. Moes, 2004

Mrs. Ir. Y. Yu, 2005

Ir. M. Van Drogen, 2005

Ir. G. Wullink, 2005

Ir. C. Van Driel 2007

Ir. D. Iakovou 2009

W. Assaad MSc. 2010

Dao Ba Phong MSc. 2011

Xiao Ma MSc. 2011

ir. W. Eggink 2011

ir. G. van der Linde 2011

Mrs. N. Karlitskaya MSc. 2011

Ir. J. Verbrugge 2012

Mrs. Ir. N. Veijgen 2013

Ir. S. Haanappel 2013

Ir. R. Reilink 2013

J. Khatait MSc 2013

Ir. F. Marchena 2013

Ir. R. Unal 2014

Ir. J. Wiebenga 2014

Ir. T. Ooijevaar 2014

L Huettinger MSc 2014

Mrs. L. Strikwerda MSc 2014

Mrs. Ir. E. Moodij 2014

J. Parada Puig MSc 2015

ir. P.l Scheffler 2015

ir. F. Constant van Amstel 2015

ir. W. Mulder 2016

ir. S. Groothuis 2016

 

 

Member of external PhD. committees:                               

 

Technical University of Delft

 

Ir. M.J. van Koetsveld, 1995

Ir. P. de Jager, 1997

Ir. K.J. de Kraker, 1997

Ir. M. Dohmen, 1998

Ir. J.W. van Vliet, 2001

Ir. Z Rusak, 2003

Ir. C. Wang, 2005

Ir. B. Meijer, 2006

Ir. R Dumitrrescu, 2007

Ir. F. Smulders, 2007,

Prof. Ir. A. Eger, 2007

ir. W. van der Vegte, 2009

ir. J. Schut, 2010

A. Alvarez Cabrera MSc. 2011

Y. Wei MSc. 2012

Ir. J. Verlinden, 2014

 

Technical University of Eindhoven

 

Ir. L. Florusse, 1993

Ir. E. Kaas, 1995

C. Magniez, 2007

 

University of Groningen

 

Drs. J. Bokhorst, 2007

 

University of Utrecht

 

N. Reich, 2010

 

Catholic University of Leuven

 

R. Willems 1998

A. Kerstens, 1999

P. de Jonghe, 2001

P. Lefebvre, 2007

D. Plakhotnik, 2012

 

Universitaet des Saarlandes

 

Mrs. Dipl-ing C. Franke, 2003

 

Technische Universitaet Hamburg- Harburg

 

Dipl-ing N. Halfmann, 2014

 

Technische Universitaet Muenchen

 

Dipl-ing S. Krotil, 2016

 

Universit� de Grenoble

 

Mrs. E. Chapa-Kasusky, 1997

S. Mer, 1998

L. Roucoules, 1999

T. Koike, 2005

 

Université de Valenciennes et de Haut Cambresis

 

D. Deneux, 1993

 

Universit� de Metz

 

D. Pallez, 2000

 

Universit� de Nantes

 

A. Candlot, 2006

J. de Duigou, 2010

 

Royal Institute of Technology, Stockholm

 

J. Nielsen, 2003

 

University of Stellenbosch

 

Y. Liu, 2007

C. Schutte, 2010

 

University of Singapore

 

I. Lee Boon Hong 1992

Mrs. S. Ong, 1995

 

 

 

 

 

 

 


 

 

Editor of international journals:

 

Editor in chief CIRP Annals 2000-2006

Editor CIRP Annals 1996-2000

CIRP International Journal on Manufacturing Science and Technology (2008-2012)

International Journal on Interactive Design and Manufacturing (2004 � present)

International Journal of Product Life Cycle management, (2006 � present)

 

 

 

Reviewer for:

 

Computers in Industry,

Computer Aided Design,

Computer Integrated Manufacturing Systems,

Computers & Industrial Engineering,

International Journal of Advanced Manufacturing Technology,

Journal of Manufacturing Systems,

Revue internationale de CFAO et d�infographie,

ASME Journal of Manufacturing Science and Engineering

and many others

 


 

 

Official functions:

 

International

 

CIRP (International Academy for Production Engineering)

 

Present:

Member of the Senate of Past Presidents (2011-present)

Past:

Chairman of the CIRP CAPP WG (1983-1992)

Chairman of CIRP WG on Manufacturing interfaces (1986-1992)

Technical Secretary of CIRP STC Optimization (1986-1995)

Vice Chairman of CIRP STC Optimization (1995-1998)

Chairman of CIRP STC Optimization (1998-2001)

Chairman of CIRP WG on CIRPNET (1996-2002)

Chairman of the CIRP Editorial Committee (1999-2005)

Vice President Elect of CIRP (2008-2009)

Vice President of CIRP (2009-2010)

President of CIRP (2010-2011)

Past President of CIRP (2011-present)

 

IFIP (International Federation for Information Processing)

 

Past:

Chairman of IFIP WG5.3 (1999-2005)

 

            At the University of Twente:

                            

Present:

 

Chair of Design Engineering, (2001- 2017) comprising the part time chairs of:

 

 

 

 

 

Packaging Design

Integrated Product Life Cycle Management

Maintenance Engineering

 

Chairman of the Educational Committee for Industrial Design Engineering (2001- 2016)

 

Past:

Scientific Director (a.i) of the IMPACT institute of Energy and Resources (2010-2011) 

Chairman of the departmental computer committee. (1990-2001)

Chairman of the Exploration Committee Industrial Design (1999-2001)

 

Other:

 

Present:

 

Scientific Director of the National Research School for Integrated Manufacturing (2004 � present)

Secretary of  the Foundation Laboratory of Production Engineering.(1990-present)

Chairman  of  the Foundation Twents Design (2005-present)

Member of the Advisory Board of Engenia (top training for professionals) (2011-present)

Member of the Board of the Industrial Design Centre (2001-2016)

Member of the Supervisory Board of the Foundation Technical Education and Services Twente (STODT) (2003- present)

Member of the Board of the Foundation Fris (2005-present)

 


 

Memberships:

 

International:

 

Present:

 

Member of the Senate of Past Presidents of CIRP (2011 - present)

Member of the CIRP Publishing Committee (2005 - 2012)

Member of the CIRP International Seminars on Manufacturing Systems Committee (1998 � present)

Fellow of CIRP (International Academy for  Production Engineering) (1994 � present)

Member of the Deutsche Akademie der Technikwissenschaften (acatech) (2009 - present)

Foreign member of the Royal Flemish Academy of Belgium for Sciences and the Arts (KVAB) (2011-present)

Senior Member of the Society of Manufacturing Engineers (SME) (2011-present)

Member of the American Society of Mechanical Engineers (ASME) (2012-present)

Member of the High Level Group and Implementation Support Group of the Technology Platform "Manufuture" of the European Commission (2011-present)

Member of the Centre Advisory Board (CAB) for the EPSRC Centre for Innovative Manufacturing in Through-life Engineering services. (2012-present)

Member of the Advisory Board of the "BMBF Spitzenclusters „Intelligente Technische Systeme Ostwestfalen Lippe (it’s OWL)" (2012-present)

Member of the evaluation team of FIMECC, one of the Finnish Strategic Centres for Science, Technology and Innovation (SHOK) (2012)

Fellow of the Design Research Society (DRS) (2012-present)

Fellow of the International Society for NanoManufacturing (ISNM) (2012-present)

 

 

 

Past:

Corresponding member of CIRP (1985-1994)

Member of the Board of CIRP (2008 - 2012)

Member of the Council of CIRP (2005 - 2012)

Member of the CIRP Liaison Committee (1986-2012)

Member of the Editorial Board of the CIRP Journal of Manufacturing Systems (1998 -2007)

Member of IFIP WG5.3 (International Federation on Information Processing) (1992-1999)

Member of IFIP TC5 (1999 � 2005)

Member of the Conseil Scientifique of Grenoble-INP (Grenoble Institute of Technology) (2008 - 2011).

 

 

At the University of Twente

 

Present:

 

Member of the management team of the Faculty of Engineering Technology (1998 � 2017)

Member of the Examination committee of Industrial Design Engineering (2001- 2017)

Member of the board of the Foundation University Faculty Club (2009 � 2017)

 

 

Past:

 

Member of the permanent departmental committee for research. (VCW, 1994 -1998)

Member of the University council for standardisation of information technology (SPIT, later ACIT, 1997-2001)

Member of the committee � de Smit� (Integration of the departments of Mechanical and Civil Engineering) (1999-2000)

 

Other:

 

Present:

 

Member of the board of the Foundation Technical Education and Service Twente. (STODT) (2000-present)

Member of the board of the foundation Industrial Design Centre (IDC) (2002-2016)

Member of the board of the foundation for the Creative Industry in Twente (FRIS) (2005-present)

Member of the board of the foundation for advanced Robotics and Mechatronics (Romech) (2008-2011)

Member of the board of the foundation for cure and care robotics (LEO) (2010-2016)

Member of the board of the foundation Rapid Manufacturing Centre (RMC) (2010-2015)

Member of the board of the working group Production Technology of the Royal Dutch Society of Engineers (KIVI) (2005- 2012)

 

Past:

 

Member of the board of the Dutch Society of Production Engineering (2005-2006)


 

Conferences:

 

 

Organisation of international conferences and member of the local organising committees of:

 

The 22nd CIRP International Seminar on Manufac�turing Systems (June 1990)

The 5th confe�rence on Manufac�turing Science and Technology of the Future (MSTF '91 - June 1991)

45th CIRP General Assembly (August 1995)

6th CIRP seminar on Computer Aided Tolerancing (March 1999)

10th CIRP International Design Seminar (March 1999)

CIRP International Manufacturing Education Conference CIMEC 2002 (April 2002)

Manufuture 2004 (December 2004)

18th CIRP Design Conference, (April 2008)

CIRP sponsored conference on Knowledge management in Product Development, (April 2008)

CIRP sponsored conference TRIZfuture �08 (November 2008)

COmpetitive MAnufacturing '10 (Co-chair) Stellenbosch SA (February 2010)

CIRPE 2012, first virtual conference Enschede (June 2012)

Fruehjahrstagung, Wissenschaftliche Gesellschaft fuer Produktentwicklung WiGeP (March 2014)

 

Member of International Conference program committees:

 

IFIP WG5.2/WG 5.3 conferences,

DIISM conferences,

IDMME conference (1996-2002)

International conferences on manufacturing automation, (1992 ,1997)

Feature Modelling and Recognition in Advanced CADCAM systems (1994)

MICAD (1993-1999), 

ICPE (1997),

World Congresses on Intelligent Manufacturing Processes and Systems. (1997)

International Conference on Quality Manufacturing (1999)

The Sculptured Surface Machining �98 conference

Knowledge Intensive CAD 2 (1996)

KIC 3 (1998)

Prolamat 1998

Swiss conference on CADCAM (1998)

IFIP WG 5.2 conference on Geometric Modelling (1998).

CIRP Manufacturing Systems conferences (1995- present)

CIRP Design conferences (1999-present)

CIRP Computer Aided Tolerancing conferences (1995- present)

International Conference of Integrated Engineering C2! 2005

Digital Enterprice Technology conferences (2006- present)

COmpetitive MAnufacturing conferences (2004- present)

Virtual Concept conferences (2006 � present)

VC-IDMME, Beijing (October 2008)

MITIP 2012

IPS2 2012

CSER 2013,

NewProlamat 2013


 

 

Co-organiser of international research seminars:        

 

Annual TURT seminar: University of Twente, UMIST (Manchester), the Royal Institute of Technology (Stockholm) and the University of Tokyo (1982-1996).

 

 

Organiser of national symposia for industry:

                       

Annual national CAD/CAM symposium and exhibition. (eight times:1986-1995).

 

Participation on invitation:

 

3 day workshop on General Design Theory by Prof. H.Yoshikawa. Sponsored by the Japanese Society for the Promotion of Science. At the University of Cambridge, UK, December 1997

 

One week course: Axiomatic Design for Professors, by Prof. N. Suh, under sponsorship of the National Science Foundation. At MIT Cambridge MA, USA, June 1998

 

 

 

 



 


 

Scientific Publications of Prof. Dr. Ir. F.J.A.M. van Houten

 

Invited Keynote Papers

 

Houten, F.J.A.M. van, (1992) Manufacturing interfaces, Annals of the CIRP, Hallwag Ltd., Bern, Vol. 41, No. 2, pp. 699-710, August 23-29, (1992), ISBN: 3-905-277-18-2

Houten, F.J.A.M. van; Erve, A.H. van 't (1992) Feature based manufacturing with PART, International conference on manufacturing automation, Hongkong, 14 pages, August 9-11, (1992)

Houten, F.J.A.M. van; Erve, A.H. van 't (1992) PART, a feature based computer aided process planning system, International Journal of CAD/CAM and Computer Graphics, Hermes, Vol. 7, No. 3, pp. 335-368, (1992), ISSN: 0298-0924

Houten, F.J.A.M. van (1992) Effective Industrial Applications of Feature Technology, Features verbessern die Produktentwicklung, Integration von Prozessketten, Berlin, 28 pages, VDI berichte 1322  pp. 1-28 February 20-21, (1997) ISBN: 3-18-091322-3

Houten, F.J.A.M. van (1997) Rapid Product Development: Fundamentals and industrial applications, Proceedings of the 8th International Conference on Production Engineering- Rapid Product Development-, Sapporo, Japan, pp.49-70, Chapman & Hall London August 18-20, (1997) ISBN: 0 412 81160 X

Houten, F.J.A.M.van,(1998) The Future of Geometric Modelling. Proceedings of the 6th IFIP WG 5.3 Workshop on Geometric Modelling, Tokyo, 1998

 

Houten, F.J.A.M. van, (1999) CAD support in Design for Maintainability, Proceedings of the 5th RACE symposium, Tokyo 1999.

 

Houten, F.J.A.M. van, (2003) Concepts and development of software platforms, Integration of Product, Process and Materials, Universit� d� Automne AIP.PRIMECA Nantes November 2003.

 

Takata, S., Kimura, F., Houten, F.J.A.M. van, Westk�mper, E., Shpitalni, M., Ceglarek, D., & Lee, J. van der (2004). Maintenance: Changing Role in Life Cycle Management. Keynote paper CIRP annals, 53(2), 643-655.

 

Houten, F.J.A.M. van  (2006). The TXCHANGE Concept Explained, Dutch Game Days, November 2006, Utrecht, the Netherlands

Houten, F.J.A.M. van  (2007). Design in the Era of Mass Customization. In D. Dimitrov (Ed.), International Conference on Competitive Manufacturing COMA '07 (pp. 81-99). Stellenbosch SA: University of Stellenbosch, SA (ISBN 0797211640).

Houten, F.J.A.M. van (2007) A scenario for future University Research and Education in Design and manufacturing, Scientific Symposium, Department of Manufacturing Engineering and Management, Technical University of Denmark, Copenhagen, August 29 2007

Houten, F.J.A.M. van (2007), TXCHANGE and IOP-IPCR: Two Modes of University/Industry Cooperation, DCED symposium, December 2007.Technical University of Delft

Houten, F.J.A.M. van (2008), Effective DFM applications for large, medium & small enterprises - examples of successful industry-university cooperation, Design and Product Development Workshop January 2008, University College Dublin, Ireland

Houten, F.J.A.M. van (2008), Design Synthesis, 18th CIRP Design Conference, April 2008., University of Twente, Enschede, the Netherlands

Houten, F.J.A.M. van (2008), Knowledge Management Research at the University of Twente, Conference on Knowledge Management in Product Development  April 2008., University of Twente, Enschede, the Netherlands

Houten, F.J.A.M. Van (2008), The role of visualization, simulation and serious gaming in collective decision making. Digital Enterprise Technology conference, Ecole Normale Sup�rieure Nantes, France 

Houten, F.J.A.M. van (2008), New approaches to Design Engineering Research, TRIZfuture�08 Conference,, November 2008., University of Twente, Enschede, the Netherlands

Houten, F.J.A.M. van (2009), Recent developments in Design Engineering Research at the University of Twente, 19th CIRP Design Conference, March 2009., Cranfield University, UK

Houten, F.J.A.M. van (2010), Innovation challenges in the Product Development Domain, Indutech Innovation Management Workshop, February 2010, Stellenbosch, South Africa

Houten, F.J.A.M. van (2010), Energy Efficiency and Sustainability as Key Drivers for Innovative Product Design, COMA'10,, February 2010, University of Stellenbosch, South Africa

Houten, F.J.A.M. van (2010), Mit Intelligenten Prozessketten zu Innovativen Produkten., Fachkolloquium Intelligente Fertigungsprozesse - Quelle zur Produktivitaetssteigerung und Kostensenkung in der Produktion, September 2010, TU Dresden, Germany

Houten, F.J.A.M. van (2010), CIRP Presidential welcome address, ICMC 2010, Sustainable Production for Resource Efficiency and Ecomobility, September 2010, Fraunhofer IWU, Chemnitz, Germany

Houten, F.J.A.M. van (2010), What Are the Global Driving Forces and How Do They Influence Production? Our Common Future Conference, Volkswagen Foundation, Deutsche Messe and Stiftung Mercator, November 2010, Essen, German

Houten, F.J.A.M. van (2010) Moderator at the 2010 Euro-CASE conference Value Creation Through Innovation, European Best practice Case Studies, december 2010, Berlin, Germany

Houten, F.J.A.M. van (2011) CIRP Presidential Welcome Address, 18th CIRP Conference on Life Cycle Engineering, LCE 2011 Braunschweig, Germany, May, 2011

Houten, F.J.A.M. van (2011) CIRP Presidential Welcome Address, 44th CIRP Conference on Manufacturing Systems, CMS2011, Madison, WI, USA, June 2011.

Houten, F.J.A.M. van (2011) CIRP Presidential Address, 61st CIRP General Assembly, Budapest, Hungary, August 2011

Houten, F.J.A.M. van (2011) Resource Efficiency from a Global Perspective, VDW/Fraunhofer IWU conference on sustainable production, Hannover, Germany, September 2011

Houten, F.J.A.M. van (2011) Challenges for the Future of European Manufacturing. EU Manufuture High Level Group Meeting, Valencia Spain, November 2011

Houten, F.J.A.M. van (2012) . acatech Impulsreferat Globalization, Themennetzwerk Produktentstehung, Berlin Germany, February 2012.

Houten, F.J.A.M. van (2012) . Sustainable Manufacturing from a Global Perspective, 37th MATADOR conference , Manchester, UK, July 2012

Houten, F.J.A.M. van (2012) . Nachhaltige Produktion mit globaler Perspective, Abschlusskonferentz zum BMBF-Forschungsprojekt "Management von Produktionsinnovationen" Berlin, Deutschland September 2012

Houten, F.J.A.M. van (2012). The Future of factories, 2nd World Manufacturing Forum, Stuttgart, Germany, October 2012

Houten, F.J.A.M. van (2013). Fremtiden for Fabrikker, for Research Council of Norway , BIAs Vareproduksjonsdager 2013, Sundvolden, Norway, January 2013

Houten, F.J.A.M. van (2013). Opening speech. International Seminar of Innovation Exchange and Cooperation between the Netherlands and China 2013. Dalian University of Technology and the Dutch Embassy., Dalian, PR China June 2013

Houten, F.J.A.M. van (2013). Virtual Reality: Wie werden Sie in Zukunft Ihre Produkte gestalten? Impulsvortrag OWL ViProSim Seminar, Heinz Nixdorf MuseumsForum, Paderborn, Germany, September 2013.

Houten, F.J.A.M. van (2013). About Machines, Computers and Academicians, Symposium Towards Cyber-Physical Production Systems, Hungarian Academy of Sciences, Budapest, Hungary, October 2013

Houten, F.J.A.M. van (2014). Productveiligheid: Verantwoordelijkheid van de ontwerper?, Congres Industriele Veiligheid, Maarssen, Netherlands, January 2014

Houten, F.J.A.M. van (2014). The Role of Design Synthesis and Virtual Reality in the Engineering of Complex Systems, Scientific Colloquium at the 25th Aniversary of the Heinz Nixdorf Institute, Engineering the Intelligent Systems of Tomorrow - Interdisciplinary challenges and Future Prospects, Paderborn, Germany September 2014

Houten F.J.A.M. van (2014) Mensen, Machines en Robots in de Slimme Industrie. U-Meet: Smart Industry, Smart Robots, Smart people, Enschede, Netherlands, October 2014

Houten F.J.A.M. van (2014) . Out of the Box Ontwerpen: Ontwerpen en Maakbaarheid, Hoe maakt U het?. Constructeursdag , Maarssen, Netherlands, November 2014

Houten F.J.A.M. van (2014) .Ontwerpen voor Industrie 4.0 , Symposium System Development 4.0, Post en Dekker. Amsterdam, Netherlands, November 2014

Houten, F.J.A.M. van (2014). Debat Industrie 4.0 , Elektrovakbeurs, Hardenberg, Netherlands, December 2014

 

Scientific Papers

 

1981

 

Houten, F.J.A.M. van

The development of a technological processor as a part of a workpiece programming system

Annals of the CIRP, Hallwag Ltd., Bern, Vol. 30, No. 1, pp. 363-368, August 30-Sept 2, (1981)

 

1983

 

Kals, H.J.J.; Houten, F.J.A.M. van

On flexible manufacture based on a production information management system (PIMS)

Manufacturing Systems, Faculty Press International, Ljubljana, Vol. 12, pp. 187-196, (1983), ISSN: 0176-3377

 

Stoltenkamp, H.; Houten, F.J.A.M. van; Kals, H.J.J.

An interactive input-translator for the programming of turning operations

Computer Applications in Production and Engineering (IFIP 1983) (CAPE'83), (Warman, E.A. (Ed.)), North-Holland Publishing Company, Amsterdam, Vol. 1, pp. 453-469, April 25-28, (1983)

 

 

 

1985

 

Houten, F.J.A.M. van; Kals, H.J.J.

ROUND, a flexible technology based process and operations planning system for NC lathes

Manufacturing Systems, Faculty Press International, Ljubljana, Vol. 14, No. 2, pp. 168-179, (1985), ISSN: 0176-3377

 

1986

 

Houten, F.J.A.M. van

Strategy in Generative Planning of Turning Processes

Annals of the CIRP, Hallwag Ltd., Bern, Vol. 35, No. 1, pp. 331-335, August 17-22, (1986), ISBN: 3-905-277-05-0

 

Houten, F.J.A.M. van

A Machine Tool Control and Monitoring System for flexible Manufacturing Systems

Proceedings of the second international conference on Computer Aided Production Engineering (CAPE'86), The Institution of Mechanical Engineers, Edinburgh, pp. 115-120, April, (1986)

 

 

1988

 

Houten, F.J.A.M. van; Erve, A.H. van 't

PART, a parallel approach to computer aided process planning

Proceedings of the fourth international conference on Computer Aided Production Engineering (CAPE'88), Edinburgh, pp. 281-288, June, (1988), ISBN: 0.85298.682.3

 

1989

 

Houten, F.J.A.M. van; Erve, A.H. van 't; Jonkers, F.J.C.M.; Kals, H.J.J.

PART, a CAPP system with a flexible architecture

Proceedings of the CIRP workshop on CAPP, Hannover, 13 pages, September, (1989)

 

Houten, F.J.A.M. van; Tiemersma, J.J.

An Adaptive Control Module for ROUND, Improvement of cutting force modelling by the use of process monitoring data

Manufacturing Systems, Faculty Press International, Ljubljana, Vol. 18, No. 1, pp. 53-66, (1989), ISSN: 0176-3377

 

Kals, H.J.J.; Houten, F.J.A.M. van; Erve, A.H. van 't

Integrated Process Planning

Proceedings of the Int. Conference on "The automated factory approaching the year 2000", Res. and Prospectives, Pisa, pp. 45-62, October 23-25, (1989)

 

1990

 

Houten, F.J.A.M. van; Erve, A.H. van 't; Kals, H.J.J.

PART, a feature based CAPP system

Manufacturing Systems, Faculty Press International, Ljubljana, Vol. 19, No. 1, pp. 25-39, (1990), ISSN: 0176-3377

 

 

 

 

Kals, H.J.J.; Houten, F.J.A.M. van; Tiemersma, J.J.

Integrated and flexible part manufacturing

Proceedings of ESPRIT-809 Workshop, Enschede, pp. 7-20, June 27, (1990), ISBN: 90-365.0384

 

1991

 

Houten, F.J.A.M. van; Erve, A.H. van 't; Boogert, R.M.; Nauta, J.M.; Kals, H.J.J.

Part, selection of machining methods and tools

Manufacturing Systems, Faculty Press International, Ljubljana, Vol. 20, No. 1, pp. 69-87, (1991), ISSN: 0176-3377

 

Kals, H.J.J.; Houten, F.J.A.M. van; Tiemersma, J.J.

Integrated and flexible part manufacturing

CIM in Nederland (CAPE'91), Samson Uitgeverij, Alphen a/d Rijn/Brussel, pp. 29-51, , (1991), ISBN: 90-14-04137-3

 

Kals, H.J.J.; Houten, F.J.A.M. van; Tiemersma, J.J.

CIM in small batch manufacturing

Manufacturing Systems, Faculty Press International, Ljubljana, Vol. 20, No. 2, pp. 165-178, (1991), ISSN: 0176-3377

 

1993

 

Kappert, J.H.; Houten, F.J.A.M. van; Kals, H.J.J.

The Application of Features in Airframe Component Design and Manufacturing

Annals of the CIRP, Hallwag Ltd., Bern, Vol. 42, No. 1, pp. 523-526, August 22-28, (1993), ISBN: 3-905-277-19-0

 

Salomons, O.W.; Houten, F.J.A.M. van; Kals, H.J.J.

Review of Research in Feature Based Design

Journal of Manufacturing Systems, Vol. 12, No. 2, pp. 113-132, (1993), ISSN: 0278-6125

 

Salomons, O.W.; Kappert, J.; Houten, F.J.A.M. van; Kals, H.J.J.

Computer Support in the (Re)design of Mechanical Products, a new approach in feature based design, focusing on the link with CAPP

IFIP Transactions, Kwowledge based Hybrid Systems (B-11) (IFIP TCS WG 5.3), (Mezgar, I; Bertok, P. (Eds.)), Elsevier, Amsterdam, pp. 91-103, April 20-22, (1993), ISBN: 0-444-81484-1

 

Salomons, O.W.; Kappert, J.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.

FROOM - A demonstration session

IFIP Transactions, Knowledge based Hybrid Systems (B-11) (IFIP TCS WG 5.3), (Mezgar, I; Bertok, P. (Eds.)), Elsevier, Amsterdam, pp. 279-287, April 20-22, (1993), ISBN: 0-444-81484-1

 

Salomons, O.W.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.

A Computer Support Tool for Re-Design, A prototype system resulting from applying a methodic design approach

Proceedings of the International Conference on Engineering Design (ICED 93), (Roozenburg, N.F.M. (Ed.)), Heurista 93 (WDK-22), Zuerich, Vol. 3, pp. 1559-1569, August 17-19, (1993), ISBN: 3-85693-0272

 

 

 

Salomons, O.W.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.

Observations from Redesign and Process Planning Practice. A study of human practice aimed at improving feature based CADD/CAPP

Proceedings of MICAD93 (MICAD-93), (Garden, Y. (Ed.)), Hermes, Paris, No. 1, pp. 115-129, February 9-12, (1993), ISBN: 2-86601-349-2

 

1994

 

Boogert, R.M.; Kals, H.J.J.; Houten, F.J.A.M. van

Tool-data management for process planning and tool preparation

Manufacturing Systems, Faculty Press International, Ljubljana, Vol. 23, No. 3, pp. 253-261, (1994), ISSN: 0176-3377

 

Kappert, J.H.; Houten, F.J.A.M. van; Kals, H.J.J.

Integrating product and die design in rubber pad forming

Sheet Metal 1994, Proceedings of the International Conference (SheMet'94), (Singh, U.P.; Shirvani, B.; Kals, H.J.J. (Eds.)), Belfast, pp. 239-250, April 12-13, (1994), ISBN: 1-85923-025-3

 

Salomons, O.W.; Slooten, F. van; Jonker, H.J.; Houten, F.J.A.M. van; Kals, H.J.J.

Interactive feature definition

Advanced CAD/CAM Systems, State-of-the-art and future trends in feature technology, (Soenen, R. and Olling, G.J. (Ed.)), Chapman & Hall, London, pp. 144-160, (1994), ISBN: 0-412-61730-7

 

Salomons, O.W.; Slooten, F. van; Koning, G.W.F. de; Houten, F.J.A.M. van; Kals, H.J.J.

Conceptual graphs in CAD, Annals of the CIRP, Hallwag Ltd., Bern, Vol. 43, No. 1, pp. 125-128, August 21-27, (1994), ISBN: 3-905-277-21-2

 

 

1995

 

Geelink, R.; Salomons, O.W.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.

Unified feature definition for feature based design and feature based manufacturing

Proceedings of the 'Computers in Engineering' Conference and the "Engineering database Symposium" (ASME CIE'95), (Busnaina, A.A.; Rangan, R. (Eds.)), The American Society of Mechanical Engineers, Boston, pp. 517-533, September 18-22, (1995), ISBN: 0-7918-1701-6

 

Geelink, R.; Salomons, O.W.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.

Flexible definition of Form Features

Proceedings PROLAMAT'95 on Life Cycle Modelling for Innovative Products and Processes (Prolamat), (F. Krause (Ed.)), Chapman & Hall, London/Berlin,  pages, November 21, (1995), ISBN: 0-412-75590-4

 

Salomons, O.W.; Jonge Poerink, H.J.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.

A Computer Aided Tolerancing Tool based on Kinematic Analogies

Proceedings of the 4th CIRP Seminar on Computer-aided Tolerancing, (Kimura, F. (Ed.)), Tokyo, pp. 53-72, April 5-6, (1995)

 

Salomons, O.W.; Kuipers, J.M.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.

Collaborative Product Development in CAD and CAPP, An Approach based on communication due to constraint conflicts and user initiative

Proceedings IFIP WG5.2 workshop on Knowledge-Intensive CAD-1 (KIC-1), (M�ntyl�, M. (Ed.)), Chapman & Hall, London, pp. 81-104, September 26-29, (1995), ISBN: 951-22-2760-6

 

Salomons, O.W.; Slooten, F. van; Franken, F.J.; Houten, F.J.A.M. van; Kals, H.J.J.

Design History Functionality in FROOM

International Journal of CAD/CAM and Computer Graphics, (Gordon, Y (Ed.)), Hermes, Paris, Vol. 10, No. 1-2, pp. 95-111, (1995), ISSN: 0298-0924

 

Salomons, O.W.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.

Conceptual Graphs in Constraint Based Re-design

Proceedings of the third ACM Symposium on Solid Modelling and Applications, (Rossignac, J.; (Eds.)), ACM Press, Salt Lake City, pp. 55-63, May 17-19, (1995), ISBN: 0-89791-672-7

 

1996

 

Boogert, R.M.; Kals, H.J.J.; Houten, F.J.A.M. van

Tool Paths and Cutting Technology in Computer-Aided Process Planning

International Journal of Advanced Manufacturing Technology, (Davies (Ed.)), Springer Verlag, Berlin, Vol. 11, No. 3, pp. 186-197, (1996), ISSN: 0268-3768

 

Lindeman, F.P.; Houten, F.J.A.M. van; Kals, H.J.J.; Nilsen, K.E.

A 3D feature based computer support tool for the design of aluminium extrusion tool assemblies

Proceedings of the 6th International Aluminium Extrusion Technology Seminar; Profiles of Change (ET '96), Chicago, Vol. 2, pp. 37-58, May 14-17, (1996)

 

Salomons, O.W.; Jonge Poerink, H.J.; Haalboom, F.J.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.,

A Computer Aided Tolerancing Tool, I: Tolerance specification, Computers in Industry, Vol. 31, No. 2, pp. 161-174, (1996), ISSN: 0166-3615

 

Salomons, O.W.; Haalboom, F.J.; Jonge Poerink, H.J.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.,

A Computer Aided Tolerancing Tool, II: Tolerance analysis Computers in Industry, Vol. 31, No. 2, pp. 175-186, (1996), ISSN: 0166-3615

 

Salomons, O.W.; Jonge Poerink, H.J.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.

A tolerancing tool based on kinematic analogies

Computer -aided tolerancing, (Kimura, F. (Ed.)), Chapman & Hall, London, pp. 47-70, (1996), ISBN: 0-412-72740-4

 

Salomons, O.W.; Kuipers, J.M.; Slooten, F. van; Houten, F.J.A.M. van; Kals, H.J.J.

Colaborative Product Development in CAD and CAPP, An Approach based on communication due to constraint conflicts and user initiative

Knowledge Intensive CAD, (Tomiyama, T; M�ntyl�, M.; Finger, S. (Eds.)), Chapman & Hall, London,  pages, (1996), ISBN: 0-412-72910-5

 

1997

 

Salomons, O.W.; Houten, F.J.A.M. van; Kals, H.J.J.

Current Status of CAT Systems

Proceedings of the 5th CIRP Seminar on Computer-aided Tolerancing, Toronto, Ontario, pp. 345-359, April 27-29, (1997)

 

 

 

1998

 

Houten, F.J.A.M. van, Tomiyama, T, Salomons, O.W.

Product Modelling for Model-Based Maintenance

Annals of CIRP, vol 47/1, pp. 123-128, 1998

 

Salomons, O.W., Geelink R.,Slooten F. van, Houten F.J.A.M. van, Kals H.J.J.,

Definition of design and manufacturing form features

Proceedings of the 31st CIRP International Seminar on Manufacturing Systems, pp.7-39, Berkeley, 1998

 

Salomons, O.W.,  Zijlstra, J., Zwaag, J. van der, Houten F.J.A.M. van.

Towards Dynamic Tolerance Analysis using Bond Graphs

Proceedings of the 1998 ASME Design Automation Conference, On CD-Rom DECT98/DAC 5631, Atlanta 1998.

 

1999

 

Salomons, O.W., Geelink R.,Slooten F. van, Houten F.J.A.M. van, Kals H.J.J.,

Definition of design and manufacturing form features, CIRP Journal of Manufacturing Systems 29(1), pp.29-32

 

Begelinger, R.E., Post, E., Houten, F.J.A.M. van, & Kals, H.J.J. (1999). Product architecture development enabling integrated re-design of mechanical products. In Proceedings of the 1999 CIRP international design seminar; Integration of process knowledge into design support (pp. 191-200). Enschede.

 

Ghoncharenko, I., Houten, F.J.A.M. van, & Kimura, Y. (1999). Collecting and utilizing information about product characteristics and emergent behavior during post-manufacturing stages. In Proceedings of the IWES '99, Int. Workshop on emergent systems (pp. 221-228). Kobe, Japan.

 

Houten, F.J.A.M. van (1999). CAD support in design for maintainability. In Proceedings of the 5th symposium on research into artifacts (pp. 11-18). Tokyo, Japan.

 

Houten, F.J.A.M. van (1999). The future of geometric modelling. In Proceedings of the 6th IFIP WG 5.2. Workshop on geometric modelling. Tokyo, Japan.

 

Nilsen, K.E., Kals, H.J.J., Houten, F.J.A.M. van, & Vaneker, T.H.J. (1999). The development of a die design support system for aluminium extrusion. In Proceedings of the 6th International Conference on Technology of Plasticity (ICTP) (pp. 309-314). N�rnberg, Germany

 

Salomons, O.W., Begelinger, R.E., Post, E., & Houten, F.J.A.M. van (1999). Application of TTRS method in industrial practice; Tolerance specification for industrial cooling water pumps. In Proceedings of the 1999 CIRP international seminar on computer aided tolerancing; Global consistency of tolerances (pp. 251-260). Enschede.

 

Salomons, O.W., Zwaag, J.A. van der, Zijlstra, J., & Houten, F.J.A.M. van (1999). Dynamic tolerance analysis I: A theoretical framework using bondgraphs. In Proceedings of the 1999 CIRP international seminar on computer aided tolerancing; Global consistency of tolerances (pp. 271-282). Enschede.

 

 

 

Salomons, O.W., Zwaag, J.A. van der, Zijlstra, J., & Houten, F.J.A.M. van (1999). Dynamic tolerance analysis II: Issues to be resolved when applying bondgraphs. In Proceedings of the 1999 CIRP international seminar on computer aided tolerancing; Global consistency of tolerances (pp. 283-292). Enschede.

 

Yue, Y., Salomons, O.W., Kals, H.J.J., & Houten, F.J.A.M. van (1999). An object-oriented assembly modeling approach. In Global Production Management (IFIP WG5.7) (pp. 556-564). Boston/Dordrecht/London.

 

2000

 

Houten, F.J.A.M. van, Kimura, F.,

The Virtual Maintenance system, A Computer-based Support Tool for Robust Design, Product Monitoring, Fault Diagnosis and Maintenance Planning, Annals of CIRP Vol 49/1, pp.  2000

 

Salomons, O.W., Arentsen, E., Aarts, R., Houten, F.J.A.M. van, Towards Dynamic Tolerance analysis using a finite element formulation, Proceedings of the 2000 ASME Design Automation Conference, On CD-Rom DECT00/DAC 5631, Baltimore 2000.

 

Nilsen, K.E., Koenis, P.T.G., Houten, F.J.A.M. van, & Vaneker, T.H.J. (2000). Development of a 3-D die design tool for aluminium extrusion. In Proceedings of the 7th International Aluminium Extrusion Technology Seminar; Profiles of Change (ET2000) (pp. 245-250). Chicago, USA.

 

Salomons, O.W., Popma, M.G.R., & Houten, F.J.A.M. van (2000). What-if synthesis support tools as a new paradigm in CAD. In TMCE 2000 Tools and methods of competitive engineering (TMCE 2000) (pp. 169-182). Delft, The Netherlands.

 

2001

 

Lutters, D., Mentink, R., Houten, F.J.A.M. van, Kals, H.J.J.,

Workflow management by Information Management, Annals of CIRP Vol 50/1, 2001, 309-312

 

Houten, F.J.A.M., The use and Development of Haptic Devices as Engineering Tools, Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, Athens 2001

 

Layer, A., Haasis, S., Houten, F.J.A.M.,  Feature-Based Design-Concurrent Cost calculation using Case Based Reasoning, Proceedings of the 2001 ASME Design Automation Conference, On CD-Rom DECT01/DFM 5631, Pittsburgh 2001.

 

Houten, F.J.A.M. van (2001). The use and Development of Haptic Devices as Engineering Tools. In G. Chryssolouris (Ed.), Proceedings of the 34th CIRP International Seminar on Manufacturing Systems (pp. 275-283). Athens, Greece.

 

Layer, A., Haasis, S., & Houten, F.J.A.M. van (). Feature based design concurrent cost calculation using case based reasoning. In Proceedings of the 2001 ASME Design for Manufacturing Conference . Pittsburgh, USA.

 

Wijnker, T.C., Lutters, D., Kals, H.J.J., & Houten, F.J.A.M. van (2001). Integration of data management systems with an ontology based information management system. In Proceedings of the 21st Conference on Computers and Information in Engineering (CIE)(CD-ROM) .

 

 

 

2002

 

Layer, A., Brinke, E. ten, Houten, F.J.A.M. van, Kals, H.J.J., & Haasis, S. (2002). Recent and future trends in cost estimation. International journal of computer integrated manufacturing, 15(6), 499-510.

 

Sailer, B., Houten, F.J.A.M. van, Kals, H.J.J., & Haasis, S. (2002). Integriertes Informationsmanagement in Vertriebs- und Auftragsabwicklungsprozessen. PPS Management, 7, 8-10.

 

Zimmermann, J.U., Haasis, S, & Houten, F.J.A.M. van. (2002). ULEO - Universal linking of engineering objects. CIRP annals, 51(1), 99-102.

 

2003

 

Mentink, R.J., Houten, F.J.A.M. van, & Kals, H.J.J. (2003). Dynamic Process management for engineering environments. CIRP annals, 52, 351-354.

 

Bonnema, G.M., & Houten, F.J.A.M. van (2003). Conceptual design in high-tech environment, published on CD-ROM. In S. Tichkiewitsch & D. Brissaud, (Eds.), Proceedings of the 2003 CIRP International Design Seminar. Laboratoire 3S.

 

De Jesus Silva, R., & Houten, F.J.A.M. van (2003). Design for Logistics - the next step to achieve integrated design decision support and product variety - published on CD-ROM. In S. Tichkiewitsch & D. Brissaud (Eds.), Proceedings of the 2003 CIRP International Design Seminar. Grenoble: Laboratoire 3S.

 

2004

 

Geelkerken, R.H., Rödel, S.G., Kunst, E.E., Kommers, P.A., Miedema, H.A., van Houten, F.J.A.M. (2004). Vascular specialists training, the practice and the future. Studies in health technology and informatics 103, pp. 245-251.

 

Lutters, D., Vaneker, T.H.J., & Houten, F.J.A.M. van (2004). 'What-if' design: a synthesis method in the design process. CIRP annals, 53(1), 113-116.

 

Eger, A.O., Lutters, D., & Houten, F.J.A.M. van (2004). Create the future: An environment for excellence in teaching future-oriented industrial design engineering. In Lloyd, P. Roozenburg, N. & McMahon, C. Brodhurst, L. (Eds.), The changing face of design education (Proceedings of the second International Engineering and product design education conference (IEPDE) (pp. 43-50). Delft, the Netherlands.

 

Hittorf, G., Vaneker, T.H.J., & Houten, F.J.A.M. van (2004). What-if design; A preliminary architecture and a survey of the main constituting elements. In Horv�th, I.; Xirouchakis, P. (Eds.), Tools and Methods of Competitive Engineering (TMCE 2004), Lausanne (pp. 453-464). Rotterdam, Lausanne: Millpress, Rotterdam, Lausanne.

 

Houten, F.J.A.M. van, & Lutters, D. (2004). 'What-if' design as an integrative method in product design. In ElMaraghy, W.; ElMaraghy, H. (Ed.), Proceedings of the 14th International CIRP Design Seminar 2004, CIRP2004Dn . Cairo, Egypt: ElMaraghy, W.; ElMaraghy, H. (Eds.).

 

Lutters, D., Vaneker, T.H.J., & Houten, F.J.A.M. van (2004). 'What-if design'; A generic approach based on information management. In Dimitrov, D. Du Preez, N. & Wijck, W. van (Eds.), Proceedings of the International Conference on Competitive Manufacturing (COMA'04) (pp. 119-124). Stellenbosch, South Africa.

 

Lutters-Weustink, I.F., Lutters, D., & Houten, F.J.A.M. van (2004). Mechatronic features in product modelling, The link between geometric and functional modelling? In Dimitrov, D., Du Preez, N. & Wijck, W. van (Eds.), Proceedings of the International Conference on Competitive Manufacturing (COMA'04) (pp. 125-130). Stellenbosch, South Africa.

 

Tideman, M., Voort, M.C. van der, & Houten, F.J.A.M. van (2004). A haptic virtual prototyping environment for design and assessment of gearshifting behaviour. In Proceedings of the 14th International CIRP Design Seminar 2004 (CIRP 2004 Dn) CIRP annals. Cairo, Egypt: ElMaraghy, W.; ElMaraghy, H..

 

Tideman, M., Voort, M.C. van der, & Houten, F.J.A.M. van (2004). Design and evaluation of a virtual gearshift application. In Proceedings of the IEEE Intelligent Vehicles Symposium 2004 (IV '04), Parma (pp. 465-470). Parma, Italy.

 

Vaneker, T.H.J., Lutters, D., Hittorf, G., & Houten, F.J.A.M. van (2004). 'What-if-design'; An illustration of applicability in the field of mechanical design. In Dimitrov, D. Du Preez, N. & Wijck, W. van (Eds.), Proceedings of the International Conference on Competitive Manufacturing (COMA '04) (pp. 235-240). Stellenbosch, South Africa.

 

2005

 

Schotborgh, W.O., Kokkeler, F.G.M., Tragter, H., & Houten, F.J.A.M. van. (2005). Dimensionless design graphs for flexure elements and a comparison between three flexure elements. Precision engineering, 29(1), 41-47.

 

Bonnema, G.M., Lutters-Weustink, I.F., & Houten, F.J.A.M. van (2005). Introducing systems engineering to industrial design engineering students with hands-on experience. In H. Selvaraj & V. Muthukumar (Eds.), Proceedings of Eighteenth International Conference on Systems Engineering (pp. 408-413). Las Vegas. USA.

 

Silva, R.J. Ir, & Houten, F.J.A.M. van (2005). Integrated design decision support and logistics strategy. In W.L. Weingaertner & E. Westkaemper (Eds.), The 38th CIRP International Seminar on Manufacturing Systems . Florianopolis, Brazil.

 

Tideman, M., Voort, M.C. van der, & Houten, F.J.A.M. van (2005). A scenario based method for product design. In Z.Q. Lin, M. Shpitalni, G. Meng, & S.C.-Y. Lu (Eds.), Proceedings of the 15th International CIRP design seminar (pp. 127-133). Shanghai, China: CIRP2005Dn.

 

Tideman, M., Voort, M.C. van der, & Houten, F.J.A.M. van (2005). Using virtual reality for scenario based product design. In X. Fischer & D. Coutellier (Eds.), Proceedings of Virtual Concept . Biarritz, France

 

Toxopeus, M.E., Lutters, D., Meijer, M.F., & Houten, F.J.A.M. van (2005). Teaching LCA back to front. In D. Brissaud, S. Tichkiewitsch, & P. Zwolinski (Eds.), Proceedings of Innovation in Life Cycle Engineering and Sustainable Development . Grenoble, France: Laboratoire Sols, Solides, Structures.

 

2006

 

Bonnema, G.M., & Houten, F.J.A.M. van (2006). Use of models in conceptual design. Journal of engineering design and technology, 17(6), 549-562.

 

Houtsma, J.A., & Houten, F.J.A.M. van. (2006). Virtual reality and a haptic master-slave set-up in post-stroke upper-limb rehabilitation. Journal of engineering in medicine, 220(H5), 715-718.

 

Vaneker, T.H.J., & Houten, F.J.A.M. van (2006). What-if design as a synthesizing working method in product design. CIRP annals, 55(2), 131-134.

 

Lutters, D., Toxopeus, M.E., & Houten, F.J.A.M. van (2006). Combined assessment methods for decision support in product development. In Duflou, J. Willems, B. Dewulf, W. (Ed.), Proceedings of the 13th CIRP LCE2006 (pp. 149-154). Leuven: Katholieke Universiteit Leuven, Belgium.

 

Oostendorp, J.A., Bode, J.M., Lutters, D., & Houten, F.J.A.M. van (2006). The (development) life cycle for packaging and the relation to product design. In Dewulf, W. Willems, B. Duflou, J. (Ed.), Proceedings LCE2006 (pp. 207-212).

 

Ouwerkerk, G. van, Vaneker, T. H. J. & Houten, F. J. A. M. van (2006). A Cad module for automatically generating complex sink-in shapes for aluminium extrusion dies. In Hlebanja, Butala, P. (Ed.), Proceedings 39th CIRP International seminar on manufacturing systems  (pp. 537-544). Ljubljana: University of Ljubljana (ISBN 9616536095). Available from: 2006 University of Ljubljana, Ljubljana (ISBN 9616536095)

 

Pletz, D., & Houten, F.J.A.M. van (2006). Cost-oriented stamping material and tolerance optimization. In Hlebanja, Butala, P. (Ed.), Proceedings of the 39th CIRP International Seminar on Manufacturing Systems (pp. 411-416). Ljubljana: University of Ljubljana, Slovenia.

 

Reinders, A.H.M.E., & Houten, F.J.A.M. van (2006). Industrial design methods for product integrated PEM fuel cells. In Proceedings NHA Annual Hydrogen Conference.

 

Schotborgh, W.O., Tragter, H., Kokkeler, F.G.M., & Houten, F.J.A.M. van (2006). A bottom-up approach for automated synthesis support in the engineering design process: Prototypes. In Birkhofer, Lindemann, U. Anfreasen, M.M. & Marjanovic, D. (Eds.), Proceedings of the Design 2006 International Design Conference (pp. 349-356). Dubrovnik, Croatia: Design 2006.

 

Toxopeus, M.E., Lutters, D., & Houten, F.J.A.M. van (2006). Environmental indicators & engineering; an alternative for weighting factors. In Dewulf, W. Willems, B. Duflou, J. (Ed.), Proceedings of the 13th CIRP International Conference on Life Cycle Engineering (pp. 75-80). Leuven, Belgium: The 13th CIRP International conference on Life Cycle Engineering.

 

2007

 

Lutters-Weustink, I.F. , Lutters, D.  & Houten, F.J.A.M. van  (2007). Domain Integration by Means of Features. In D. Dimitrov (Ed.), International Conference on Competitive Manufacturing COMA '07 (pp. 107-112). Stellenbosch, SA: University of Stellenbosch, SA (ISBN 0797211640).

 

Miedema, J. , Voort, M.C. van der , Lutters, D.  & Houten, F.J.A.M. van  (2007). Synergy of Technical Specification, functional specifications and scenarios in requirements specifications. In F.-L. Krause (Ed.), Proceedings of the 17th CIRP Design Conference (pp. 235-245). Berlin: Fraunhofer IPK (ISBN 9783540698197).

 

Ouwerkerk, G. van , Sluiter, E.J. , Vaneker, T.H.J.  & Houten, F.J.A.M. van  (2007). Development of a software module for functionality-driven manufacturability optimisations for sink-ins in extrusion dies. In Proceedings Aluminium Two Thousand.

 

Reinders, A.H.M.E. , Boer, A. de (Technische-Mechanica / Structural Dynamics and Acoustics (SD&A)) & Houten, F.J.A.M. van  (2007). Innovative product design with PEM fuel cell technology for clean urban mobility. In Unknown ED (Ed.), European Hydrogen Energy Conference, Maastricht, 18-22 June 2007 The Netherlands. Maastricht: European Hydrogen Energy Conference.

 

Schotborgh, W.O. , Tragter, H. , Kokkeler, F.G.M.  & Houten, F.J.A.M. van  (2007). A method to translate an engineering design process into a structure for computational synthesis. In Knowledge, innovation and sustainability (pp. 65-66). Paris, France: Ecole Centrale Paris.

 

Schotborgh, W.O. , Tragter, H. , Kokkeler, F.G.M. , Houten, F.J.A.M. van  & Tomiyama, T.  (2007). Towards a Generic Model of Smart Synthesis Tools. In F.-L. Krause (Ed.), The Future of Product Development, Proceedings of the 17th CIRP Design Conference (pp. 65-74). Berlin: Fraunhofer IPK, Germany (ISBN 9783540698197).

 

Vaneker, T.H.J. , Lutters, D.  & Houten, F.J.A.M. van  (2007). Human Centered Product Data Exchange in Manufacturing Environments. In D. Dimitrov (Ed.), International Conference on Competitive Manufacturing COMA '07 (pp. 493-498). Stellenbosch, SA: University of Stellenbosch, SA (ISBN 0797211640).

 

 

2008

 

Jauregui-Becker, J.M. , Tragter, H.  & Houten, F.J.A.M. van  (2008). Structure and models of artifactual routine design problems for computational synthesis. CIRP Journal of Manufacturing Science and Technology, (ISSN 17555817), 1(3), 120-125.

 

Vaneker, T.H.J. , Koenis, P.T.G. , Ouwerkerk, G. van , Nilsen, K.E.  & Houten, F.J.A.M. van  (2008). Integrated bottom up and top down approach to optimization of the extrusion process. CIRP Annals 2008 Manufacturing Technology, (ISSN 0007-8506), 57/1, 183-186.

 

Borches-Juzgado, P.D. & Bonnema, G.M.  (2008). 'Living' Architecture Overviews - Supporting the Design of Evolutionary Complex Systems. In J..Miedema F.J.A.M. van Houten (Ed.), CIRP Design Conference 2008. Enschede, the Netherlands: University of Twente.

 

Brouwer, M.  & Voort, M.C. van der  (2008). Scenarios as a communication tool in the design process: examples from a design course. In J..Miedema D. Lutters F.J.A.M. van Houten (Ed.), Proceedings CIRP Design Conference 2008. Enschede, the Netherlands: University of Twente (ISBN 9789036526340).

 

Jauregui-Becker, J.M., Wits, W.W.  & Houten, F.J.A.M. van  (2008). Reducing design complexity of multidisciplinary domain integrated products: a case study. In Proceedings of the 41st CIRP Conference on Manufacturing Systems (pp. 149-154). Tokyo, Japan: University of Tokyo (ISBN 9781848002661).Has won the Best Paper Award

 

Jauregui-Becker, J.M. , Tragter, H.  & Houten, F.J.A.M. van  (2008). Structuring and modeling routine design problems for computational synthesis development. In Miedema.J. Houten F.J.A.M. van (Ed.), Proceedings CIRP Design Seminar 2008. Enschede, NL: University of Twente (ISBN 9789036526340).

 

Miedema, J. , Voort, M.C. van der  & Houten, F.J.A.M. van  (2008). Using synthetic environments to improve early product development stages. In J..Miedema D. Lutters F.J.A.M. van Houten (Ed.), Proceedings CIRP Design Conference 2008. Enschede, the Netherlands: University Twente (ISBN 9789036526340).

 

Ouwerkerk, G. van , Vaneker, T.H.J. , Houten, F.J.A.M. van , Nilsen, K.E.  & Koenis, P.T.G.  (2008). Die Design and Manufacturability Formalization Using the Medal Axis Transform. In Proceedings of the Ninth International Aluminum Extrusion Technology Seminar. Wauconda, USA: Extrusion Technology for Aluminum Profiles Foundation. Available from: 2008 Extrusion Technology for Aluminum Profiles Foundation, Wauconda, USA

 

Reinders, A.H.M.E.  & Houten, F.J.A.M. van  (2008). How innovation methods contribute to product design with PEM fuel cell technology for clean urban mobility. In Proceedings of NHA Annual Hydrogen Conference 2008. Sacramento, USA.

 

Schotborgh, W.O. , Kokkeler, F.G.M. , Tragter, H. , Roring, M.H.L.  & Houten, F.J.A.M. van  (2008). Towards a development method for computational synthesis systems. In M..Storga N. Pavkovic D. Marjanovic (Ed.), Proceedings of the Design 2008 (pp. 665-671). Zagreb, Croatia: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, (ISBN 9536313901).

 

Schotborgh, W.O. , Kokkeler, F.G.M. , Tragter, H. , Bomhoff, M.J. (Discrete Mathematics and Mathematical Programming (DMMP)) & Houten, F.J.A.M. van  (2008). A Generic Synthesis Algorithm for Well-Defined Parametric Design. In J..Miedema E. Lutters F.J.A.M. van Houten (Ed.), Proceedings CIRP Design Conference. Enschede, the Netherlands: University of Twente (ISBN 9789036526340).

 

Tideman, M. , Voort, M.C. van der  & Houten, F.J.A.M. van  (2008). Development and evaluation of a scenario based method for product design. In J..Miedema D. Lutters F.J.A.M. van Houten (Ed.), Proceedings CIRP Design Conference 2008. Enschede, the Netherlands: University of Twente (ISBN 9789036526340).

 

Tragter, H. , Schotborgh, W.O. , Roring, M.H.L.  & Houten, F.J.A.M. van  (). Generic data architecture for parametric synthesis system. In Miedema.J. Houten F.J.A.M. van (Ed.), CIRP Design Conference on Design Synthesis. Enschede, Netherlands: University of Twente (ISBN 9789036526340).

 

Vaneker, T.H.J.  & Lutters, D.  (2008). Proceedings of the 8th ETRIA world conference. In E..Lutters T. Vaneker (Ed.), Proceedings of the 8th ETRIA world conference. Enschede, the Netherlands: University of Twente (ISBN 9789036527491).

 

2009

 

J.M. Jauregui-Becker, H. Tragter, F.J.A.M. van Houten Structure and models of artifactual routine design problems for computational synthesis, CIRP Journal of Manufacturing Science and Technology, Volume 1, Issue 3, 2009, Pages 120-125

J. Miedema, M.C. van der Voort, F.J.A.M. van Houten, Advantageous application of Synthetic Environments in product design, CIRP Journal of Manufacturing Science and Technology, Volume 1, Issue 3, 2009, Pages 159-164.

Dam, D.C. ten , Anema, H.F.A. , Houten, F.J.A.M. van  & Lutters, D.  (2009). CNC Worknet: a network of flexible production plants (CD ROM). In S. Tichkiewitch & D. Brissaud (Eds.), 42nd CIRP Conference on Manufacturing Systems, Sustainable development of Manufacturing Systems. Grenoble, France: G-Scop

Jauregui Becker, J.M. , Tragter, H.  & Houten, F.J.A.M. van  (2009). From How Much to How Many: a Method to Develop Representations for Computational Synthesis. In M. Norell Bergendahl, M. Grimheden, L. Leifer, P. Skogstad & U. Lindemann (Eds.), ICED09 The 17th International Conference on Engineering Design, Vol 6 (pp. 6-359-6-370). Stanford, USA: The Design Society (ISBN 9781904670100).

Jauregui Becker, J.M. , Tragter, H.  & Houten, F.J.A.M. van  (2009). Toward a Bottom-up Approach to Automate the Design of Cooling Systems for Injection Molding (CD ROM). In L.A. Piegl, T. Kurfess, R.J. Arinyo & W. Ma (Eds.), 2009 International CAD Conference and Exhibition. CAD Solutions LLC.

Jauregui Becker, J.M. , Tragter, H.  & Houten, F.J.A.M. van  (2009). Structure and models of artifactual routine design for computational synthesis. CIRP journal of manufacturing science and technology, (ISSN 1755-5817), 1(3), 120-125.

Miedema, J. , Voort, M.C. van der  & Houten, F.J.A.M. van  (2009). Using Synthetic Environments to improve early product development stages. CIRP journal of manufacturing science and technology, (ISSN 1755-5817), 1(3), 159-164.

Wendrich, R.E., Tragter, H. , Kokkeler, F.G.M.  & Houten, F.J.A.M. van  (2009). Raw shaping form finding: tact tangible CAD. Computer- aided design and applications, (ISSN 1686-4360).
           

Olthof, M.M. , Jauregui Becker, J.M. , Tragter, H.  & Houten, F.J.A.M. van  (2009). Knowledge Aquisition of Routine Design Problems in Industrial Settings. In E. Bolisani (Ed.), Proceedings of the 10th European Conference on Knowledge Management (pp. 597-608). Reading, UK: Academic Publishing International (ISBN 9781906638405).

Schotborgh, W.O. , Kokkeler, F.G.M. , Tragter, H.  & Houten, F.J.A.M. van  (2009). Analysis-Oriented Decomposition of Design Processes. In E. Bolisani (Ed.), Proceedings of the 10th European Conference on Knowledge Management (pp. 755-764). Reading, UK: Academic Publishin International (ISBN 9781906638405).

Schotborgh, W.O. , Kokkeler, F.G.M. , Tragter, H.  & Houten, F.J.A.M. van  (2009). Why is design automation software not everywhere? In M. Norell Bergendahl, M. Grimheden, L. Leifer, P. Skogstad & U. Lindemann (Eds.), ICED09 The 17th International Conference on Engineering Design, Vol. 8 (pp. 8-1-8-10). Stanford: The Design Society (ISBN 9781904670162).

Wendrich, R.E., Tragter, H. , Kokkeler, F.G.M.  & Houten, F.J.A.M. van  (2009). Bridging the Design Gap: Towards an intuitive Design Tool (CD ROM). In Proceedings of the 26th ICSID World Design Congress and Education Congress 2009. Singapore: ICSID.

 

2010

 

Alvarez Cabrera, A.A. , Foeken, M.J. , Tekin, O.A. , Woestenenk, K. , Erden, M.S. , De Schutter, B. , Tooren van, M.J.L. , Babuska, R. , Houten, F.J.A.M. van  & Tomiyama, T.  (2010). Towards automation of control software: A review of challenges in mechatronic design. Mechatronics, (ISSN 0957-4158).

 

Bonnema, G.M. , Borches, P.D , Kauw-A-Tjoe, R.G.  & Houten, F.J.A.M. van  (2010). Communication: Key Factor in Miltidisciplinary Sysem Design. In B. Cloutier Sauser & E. Gill (Eds.), 8th Annual Conference on Systems Engineering Research (CSER) (pp. 11-20). Hoboken, NJ, USA: Stevens Institute of Technology.

Gorter, T., Voerman, E. J., Joore, P., Reinders, A. H. M. E. & Houten, F. J. A. M. van (2010). PV-boats: design issues in the realization of PV powered boats. In Proceedings EU PV SEC (pp. 4920-4927). Munich, Germany: Imprint (ISBN 3936338264).

Schotborgh, W. O., Kokkeler, F. G. M., McMahon, C. A. & Houten, F. J. A. M. van (2010). Toward a practical guide to knowledge engineering for parametric routine design. In Storga.M. Pavkovic N. Marjanovic D. (Ed.), 11th International Design Conference DESIGN 2010. Dubrovnik-Croatia: the Design Society (ISBN 978-953-7738-03-7).

Wendrich, R. E. & Houten, F. J. A. M. van (2010). Exploring Tacit and Tangible Interaction Design. In Proceedings of the 12th VRIC Virtual Reality International Conference 2010 (pp. 57-58). Laval, France.

Wits, W. W. & Riele, G. J. te (2010). Advances in Integrated Heat Pipe Technology for Printed Circuit Boards. In Proceedings of the 40th International Conference on Environmental Systems. Barcelona, Spain: American Institute of Aeronautics and Astronautics, Curran associates (ISBN 978-1-60086-746-0).


 2011


Wits, W. W. & Houten, F. J. A. M. van (2011). Improving system performance through an integrated design approach. CIRP annals, (ISSN 0007-8506), 60/1, 187-190.
Impact: 1.708 / top10: no / rank: 6 (1) / domain: ENGINEERING, MANUFACTURING

Dongen, L. A. M. van, Lutters, D. & Houten, F. J. A. M. van (2011). Maintenance as an integrated optimization criterion in development life cycles. In Proceedings 44th CIRP Conference on Manufacturing Systems. Madison, WI, USA: Omnipress.

Hermann, C., Zein, A., Wits, W. W. & Houten, F. J. A. M. van (2011). Visualization of environmental impacts for manufacturing processes using virtual reality. In . Madison, USA: University of Wisconsin.

Jauregui Becker, J. M., Schotborgh, W. O. & Houten, F. J. A. M. van (2011). A Decomposition Algorithm for Parametric Design. In Hicks,.B.J. McAloone, T.C. Culley, S.J. &  Chen, W. (Eds.), Proceedings International Conference on Engineering Design 2011, ICED 2011 (pp. 389-398). Copenhagen, Denmark: The Design Society (ISBN 978-1-904670-28-5).

Jauregui Becker, J. M., gebauer, K. W. J. & Houten, F. J. A. M. van (2011). A new metamodel to represent topologic knowledge in artifactual design. In Hicks,.B.J. McAloone, T.C. Culley, S.J. &  Chen, W. (Eds.), Proceedings International Conference on Engineering Design 2011 (pp. 402-413). Copenhagen, Denmark: The Design Society (ISBN 978-1-904670-28-5).

Jauregui Becker, J. M., Wits, W. W. & Houten, F. J. A. M. van (2011). Modeling the structure and complexity of engineering routine design problems. In Thompson, M.K. (Ed.), Proceedings of the 21st CIRP Design Conference (pp. 159-166). Daejeon, South Korea: KAIST (ISBN 978-89-89693-29-1).

 

2012

Schotborgh, W. O., McMahon, C. A. & Houten, F. J. A. M. van (2012). A knowledge aquisition method to model parametric engineering design process. International journal of computer aided engineering and technology, (ISSN 1757-2657), 4(4), 373-391.

Gorter, T., Reinders, A. H. M. E. & Houten, F. J. A. M. van (2012). Monitored PV system data analysis of PV-powered racing boat during the Frisian Solar Challenge. In 27th EU Photovoltaic Solar Energy Conference and Exhibition. Frankfurt.

Gorter, T., Voerman, E. J., Joore, J., Reinders, A. H. M. E. & Houten, F. J. A. M. van (2012). PV system data analysis of a PV-powered racing boat during the Frisian Solar Challenge 2010. In 38th IEEE Photovoltaic Specialists Conference (pp. 003316-003321). Austin, USA: Institute of Electrical and Electronics Engineers.

Veldhuis, A. J., Reinders, A. H. M. E. & Houten, F. J. A. M. van (2012). Comparison of BIPV simulation with monitored data: the case of a 35 kWp PV system in Jayapura, Indonesia. In 27th EU Photovoltaic Solar Energy Conference and Exhibition (pp. 3971-3974). Frankfurt (ISBN 3936338280).

 

2013

Damgrave, R. G. J., Lutters, D. & Houten, F. J. A. M. van (2013). The Virtual Reality Lab as a Synthetic Environment: from strategic approach to practical implement. In Proceedings CIRP Design Conference 2013

 

2014

  

D. Lutters (2), F. van Houten (1), A. Bernard (1), E. Mermoz (3), C. Schutte (3),Tools & Techniques for Product Design, CIRP Annals    

 

 

 

Dn,  63/2/2014,  P.607

 

Marcello Colledani (2), David Gyulai, Laszlo Monostori (1), Marcello Urgo, Johannes Unglert, Fred Van Houten (1) Design and Management of Reconfigurable Assembly lines in the Automotive Industry.(GA Presentation) O, 65/1/2016, P.441

Other publications

 

 

 

PhD Thesis

 

Houten, F.J.A.M. van

PART: A computer aided process planning system

Ph.D.-Thesis, University of Twente, Enschede, The Netherlands, 226 pages, May 2, (1991), ISBN: 90-9004127-3

 

Inaugural lecture

 

Houten, F.J.A.M. van (1999). Achter de schermen (1999, 12 December). Enschede: Grafisch Centrum Twente.

 

 

Books

 

Kals, H.J.J.; Houten, F.J.A.M. van; Tiemersma, J.J.

Advanced control systems and Concepts, State of the Art

ESPRIT Report 1/2, Project 809, Brussel,  pages, (1986)ADVANCE \d 1

 

James, A.; Kals, H.J.J.; Houten, F.J.A.M.

Voorstudie SPIN-projekt: Een werkvoorbereidingssysteem

(Preliminary study SPIN project: A process planning system (in Dutch))

University of Twente, Enschede,  125 pages, (1987)ADVANCE \d 1

 

Houten, F.J.A.M. van, & Kals, H.J.J. (1999). Global consistency of tolerances. Dordrecht: Kluwer Academic Publishers.

 

Kals, H.J.J., & Houten, F.J.A.M. van (1999). Integration of process knowledge into design support systems. Dordrecht: Kluwer Academic Publishers.

 

Kals, H.J.J., & Houten, F.J.A.M. van (Eds.). (2002). CIRP International Manufacturing Education Conference; CIMEC-2002. Enschede, the Netherlands: University of Twente.

 

Drukker, J.W. (ed.) Damgrave, Roy, Dankers, Winnie, van Houten, Fred, Lutters, Eric, Wendrich, Robert :

Virtual Reality Lab, (2013) ISBN 978-90-365-1202-2, DOI, 10-3990/1.9789036512022, University of Twente Enschede, Netherlands

 

Book chapters

 

1985

 

Houten, F.J.A.M. van

Numerieke Besturing (Numerical Control (in Dutch))

CAD/CAM Handboek, Samson Uitgeverij, Alphen a/d Rijn/Brussel, pp. A5000 1-13, (1985)ADVANCE \d 1

 

1991

 

Kals, H.J.J.; Houten, F.J.A.M. van; Tiemersma, J.J.

Ge�ntegreerde en flexibele onderdelenfabricage

(Integrated and flexible parts production (in Dutch))

CAD/CAM Handboek, Samson Uitgeverij, Alphen a/d Rijn/Brussel, Vol. 2, pp. BB3002, 1-26, (1991)ADVANCE \d 2

 

2000

 

Goncharenco, I., Houten, F.J.A.M. van, & Kimura, F. (2000). An agent-based technique for collecting product operational information to support design and maintenance. In Maintenance Engineering Laboratory (April 1997-March 2000) Final Report (pp. 113-118). Tokyo, Japan: University of Tokyo.

 

Goncharenco, I., Houten, F.J.A.M. van, & Kimura, F. (2000). Collecting and utilising information about product characteristics and emergent behaviour during post-manufacturing stages. In Maintenance Engineering Laboratory (April 1997-March 2000) Final Report (pp. 93-100). Tokyo, Japan: University of Tokyo.

 

Houten, F.J.A.M. van (2000). CAD support in design for maintainability. In Maintenance Engineering Laboratory (April 1997-March 2000) Final Report (pp. 21-29). Tokyo, Japan: University of Tokyo.

 

2004

 

Bonnema, G.M., & Houten, F.J.A.M. van (2004). Conceptual design in a high-tech environment. In Tichkiewitch, S.; Brissaud, D. (Ed.), Methods and Tools for Cooperative and Integrated Design. Dordrecht, Boston, London: Kluwer Academic Publishers.

 

2006

 

Houten, F.J.A.M. van (2006). What-IF-design as an integrative method in product design. In ElMaraghy, W. & ElMaraghy, H.A. (Eds.), Advances in Design (pp. 37-48). Berlin, Germany: Springer Verlag.

 

Tideman, M., Voort, M.C. van der, & Houten, F.J.A.M. van (2006). Haptic virtual prototyping for design and assessment of gear-shifts. In ElMaragy, W. Elmaraghy, H.A. (Ed.), Advances in Design (pp. 461-472). Berlin: Springer Verlag.

 

Tideman, M., Voort, M.C. van der, & Houten, F.J.A.M. van (2007). Using virtual reality for scenario based product design. In Coutellier Fischer, X. (Ed.), Research in interactive Design. Berlin: Springer Verlag.